Respray Your uPVC Instead of Replacing It
Yes, the uPVC windows, doors, conservatory frames, fascias and soffits on a Willerby home can be resprayed in a new colour rather than replaced: prices start from £80 a window and £200 a uPVC door, most jobs take 1 to 2 days on site, and because we use Kolorbond-certified coatings every uPVC respray carries a 10-year written guarantee.
Our workshop is in Sheepscar, Leeds, 59 miles (about 1 hour 9 minutes by road) from Willerby. Of the 4,990 properties around Willerby centre, 27% were built from 1973 onwards and 4% before 1919, which shapes the likely condition of the frames and the colours that suit them.
- Windows, French and patio doors
- Conservatory frames and porches
- Fascias, soffits and bargeboards
- Any RAL colour, from samples
uPVC respray in Willerby: key facts
| Windows | £80 to £150 each |
|---|---|
| uPVC doors | £200 to £350 |
| Whole house | £2,000 to £5,500 typical |
| Time on site | 1 to 2 days (whole house 2 to 3) |
| Guarantee | 10 years, written (Kolorbond) |
| Quote | Fixed price, in writing |
Willerby Homes and Their uPVC: The Figures
What the official figures say about the homes around Willerby centre, and what that means for a uPVC respray.
Willerby at a glance
| Council | East Riding of Yorkshire Council |
|---|---|
| County | East Riding of Yorkshire |
| From our Leeds workshop | about 1 hour 9 minutes by road (59 miles), to the east |
| Households counted | 4,620 in the 7 neighbourhoods nearest the centre |
| Owner-occupied | 88% (average across the towns we cover: 63%) |
| Privately rented | 9% (average 19%) |
Type of home
When the homes were built
When homes in Willerby were built, and what that means for the frames
Around Willerby centre, the Valuation Office Agency counts 4,990 properties: 4% built before 1919, 29% between the wars, 40% from 1945 to 1972, 17% from 1973 to 1999 and 10% since 2000. The largest difference from other towns is the 40% (about 1,980 properties) built from 1945 to 1972, well above the 26% average. Those 1,980 houses went up with timber, steel or aluminium windows, and most are now on a second set, usually uPVC fitted from the 1980s onwards. Across those 1,980 properties, expect frames that still open and seal well but have faded, yellowed or greyed with age, which is the condition a respray is meant for. The 29% built between the wars is also well above the 16% average: about 1,430 interwar homes, many with bay windows that are costly to remake but simple to respray.
Only 27% of properties here (about 1,360) were built from 1973 onwards, below the 36% average, while 33%, about 1,650, predate 1939. So most of the uPVC around Willerby centre was fitted to older houses as replacement windows, and on those 1,650 pre-1939 properties the frame colour has a bigger effect on how the building looks.
Types of home in Willerby, and a worked price
Of the 4,620 households counted around Willerby centre in the 2021 Census, 30% live in detached houses, 50% in semi-detached, 12% in terraced houses and 7% in flats. The largest group is semi-detached houses, about 2,310 households or 50% (average 37%), and at our published rates a semi-detached house with seven windows and two doors would come to roughly £960 to £1,750 before fascias, soffits or a conservatory, with the exact price set after we check frame sizes, condition and access.
Detached and semi-detached houses together account for 80% of households, about 3,720 (average 58%), and houses like these tend to have more elevations, longer runs of fascia and soffit, and often a conservatory or porch. For those 3,720 homes, the whole-house package of £2,000 to £5,500 on our service page is a more realistic guide than a per-window price.
About 4,280 households here (93%) live in houses rather than flats, and many houses with uPVC windows also have a uPVC roofline of fascias, soffits and bargeboards that weathers alongside them; spraying the roofline in the same visit as the frames ties the colour together and is usually more economical than two separate jobs.
Owners, landlords and timing
88% of households own their home, about 4,060, above the 63% average, and only 9% rent privately; for those owner-occupiers the comparison that matters is with replacement, which our service page puts at £8,000 to £15,000 for a whole house against £2,000 to £5,500 for a full respray with a 10-year written guarantee.
Sources: ONS Census 2021, tables TS044 (accommodation type) and TS054 (tenure), via Nomis, aggregated over the LSOAs nearest each town centre; Valuation Office Agency, Council Tax: stock of properties 2025 (CTSOP4.1, build period, 31 March 2025); OS Open Names and ONS Postcode Directory via postcodes.io; OSRM routing on OpenStreetMap data, from LS7 1AH. "Average" is the household-weighted average across the 203 towns and villages on our areas page. Figures compiled 2026-10-19.
How a Kolorbond uPVC Respray Works
uPVC is smooth and non-porous, so ordinary paint has little to grip and soon peels; a proper respray uses coatings made for uPVC, applied in a set order:
- Survey: frames checked for soundness
- Deep clean to remove chalking
- Specialist uPVC adhesion primer
- Two Kolorbond-certified topcoats, HVLP-sprayed
- Joint inspection, then written guarantee
Glass, seals, brickwork and handles are masked throughout, and we use Kolorbond-certified coatings made to bond to uPVC, which is what allows us to give a 10-year written guarantee on uPVC; a professionally applied coating lasts 10 years or more in normal conditions, and our article on how long uPVC spray painting lasts in Yorkshire weather explains what affects that.
Respray or replace?
Replacing every uPVC window and door on a house typically costs £8,000 to £15,000 and counts as controlled work under the Building Regulations, whereas a respray at £2,000 to £5,500 leaves the existing double glazing, seals and hinges untouched; replacement is still the right call if frames are warped or cracked or the sealed glass has failed, and we will tell you so at the survey; see our comparison of uPVC spraying and window replacement costs.
Choosing a colour in Willerby
With a mix of 4% pre-1919 and 27% post-1973 properties among the 4,990 here, there is no single house style to design around, which is one reason anthracite grey (RAL 7016) is so widely chosen: it suits red brick, buff brick, stone and render alike, with sage and darker greens, cream and black the other common choices, and our guide to the colours uPVC can be sprayed explains the options.
A uPVC conservatory can be resprayed on its own or with the house (read what spraying a uPVC conservatory involves), and if it is only the front door you want to change, see front door spraying in Willerby.
Booking a uPVC Respray in Willerby
Getting to Willerby
Willerby is 59 miles and about 1 hour 9 minutes by road from Leeds, a longer trip that we plan for: we plan jobs here in consecutive days and confirm the dates in writing, and your fixed-price quote tells you up front whether the distance affects price or scheduling.
uPVC Spray Painting near Willerby
- uPVC Spray Painting Kirk Ella 0 mi
- uPVC Spray Painting Anlaby 1 mi
- uPVC Spray Painting Cottingham 2 mi
- uPVC Spray Painting Swanland 2 mi
- uPVC Spray Painting Hessle 2 mi
- uPVC Spray Painting North Ferriby 3 mi
Distances are straight-line from Willerby centre. See every area we cover.
Other work we do in Willerby
Get a Free uPVC Spray Painting Quote in Willerby
Tell us a little about the job. We reply within 2 working hours and send a fixed-price written quote within 48 hours of the consultation.
What Customers Say About Our UPVC respray Work
“Had new anthracite sliding doors fitted after major construction work, and Matt sprayed our old white uPVC windows to match perfectly. A massive saving on having new ones fitted.”
“Used this company to have our porch and back door colour matched and sprayed to match our new uPVC windows. They look brand new. Friendly team and easy to work with.”
“ColourHaus provided an exceptional service from start to finish. We had our kitchen cabinets sprayed plus a couple of uPVC windows. The cabinets look brand new.”
These are genuine Google reviews of our uPVC respray work from customers across Yorkshire, not only Willerby. Read all our reviews.
uPVC Spray Painting in Willerby: Questions
How much does uPVC spray painting cost in Willerby?
Windows are £80 to £150 each, uPVC doors £200 to £350, and a whole-house package with fascias and soffits is typically £2,000 to £5,500; the most common home in Willerby is a semi-detached house (about 2,310 of 4,620 households), and a semi-detached house with seven windows and two doors works out at roughly £960 to £1,750 before your fixed quote.
What guarantee comes with a uPVC respray?
Every uPVC respray done with Kolorbond-certified coatings carries a 10-year written guarantee covering adhesion and colour stability, issued when the job is signed off.
How long does a uPVC respray take in Willerby?
Most jobs take 1 to 2 days on site and a whole-house package 2 to 3 days, in dry weather; at 59 miles (about 1 hour 9 minutes by road) from our workshop, Willerby jobs are planned as one continuous block with the dates confirmed in writing.
Can faded or yellowed uPVC in Willerby be resprayed?
Usually, yes: chalking, yellowing and greying are surface changes caused by sunlight, and they are common on the replacement and first-generation frames of the 1,980 Willerby properties built from 1945 to 1972 (40%); deep cleaning removes the residue before the primer goes on, and frames that are warped or cracked are better replaced, which we will say at the survey.
How far is Willerby from ColourHaus?
Our workshop is at Unit 9 Taverners Walk, Sheepscar, Leeds LS7 1AH. Willerby is about 59 miles by road, roughly 1 hour 9 minutes away, to the east. We confirm visit dates and anything distance-related in your fixed-price quote before you commit.
Do I need permission to change exterior colours in Willerby?
Usually not for an ordinary house, but listed buildings, conservation areas and Article 4 areas can need consent from East Riding of Yorkshire Council. If your home is in one, check with the council first; we can give you the exact RAL or BS colour reference for the application.