0% Finance Available  ·  Ask about finance

Front Door Spraying in Anlaby

uPVC, composite and timber front doors resprayed on site from £200 in any RAL or Farrow & Ball colour

Get a free quote Call 07977 189905

Front Door Spraying in Anlaby: The Short Answer

We respray front doors in Anlaby on site from £200 for a standard uPVC or composite door, usually in one day; Anlaby is 57 miles by road (about 1 hour 9 minutes) from our workshop in Sheepscar, Leeds.

With 43.3% of the 6,390 properties around Anlaby centre built from 1945 to 1972 and 12.5% from 1973 to 1999, many front doors here are likely to be uPVC replacements, which take an HVLP-sprayed Kolorbond-certified finish in any RAL colour; see the full front door spraying service or our notes on spraying uPVC front doors.

At a glance

uPVC or composite doorfrom £200
Timber doorfrom £250
Frame and surround£80 to £120
uPVC guarantee10 years with Kolorbond-certified coatings
Time on siteusually one day
Back in usewithin 24 hours
From our workshop57 miles, about 1 hour 9 minutes
Timber, composite, GRP, steel5-year written guarantee

Front Doors We Spray

Going by the age of the 6,390 properties around Anlaby centre, these are the doors we would expect to meet in Anlaby, uPVC first; GRP and steel doors, frames and side panels get their own primers, and handles and letterboxes come off rather than being masked.

  • uPVC doors: sprayed with Kolorbond-certified coatings made to bond to uPVC and guaranteed for 10 years; the usual replacement door on the 12.5% of local properties built from 1973 to 1999, roughly 800 homes.
  • Composite doors: a specialist adhesion primer and two spray topcoats that stand up to daily use; builder-fitted composites are common on the 11.1% of Anlaby properties built since 2000, about 710 homes.
  • Timber and hardwood doors: grain filling, primer and topcoats for a smooth, brush-free face, from £250; with only 4.4% of properties here pre-dating 1919, a timber door here is as likely to be a later replacement as an original.

Anlaby Homes in Numbers

What the official figures say about the homes around Anlaby centre, and what that means for a front door respray.

Anlaby at a glance

CouncilEast Riding of Yorkshire Council
CountyEast Riding of Yorkshire
From our Leeds workshopabout 1 hour 9 minutes by road (57 miles), to the east
Households counted5,963 in the 9 neighbourhoods nearest the centre
Owner-occupied78% (average across the towns we cover: 63%)
Privately rented13% (average 19%)

Type of home

Detached18% avg 20%
Semi-detached49% avg 37%
Terraced22% avg 27%
Flats11% avg 15%

When the homes were built

Built before 19194% avg 21%
1919 to 193928% avg 16%
1945 to 197243% avg 26%
1973 to 199912% avg 19%
2000 onwards11% avg 17%

What the age of Anlaby homes means for your front door

Only 4.4% of the 6,390 properties around Anlaby centre were built before 1919, against a 21% average. With just 280 or so homes of that age, original Victorian timber doors are the exception in Anlaby.

Another 28.2% of properties, roughly 1,800, went up between the wars (well above the 16% average). Front doors of that era were often timber with glazed upper panels or leaded lights; where one survives, we mask the glass and spray the timber around it.

43.3% of local properties date from 1945 to 1972 and 12.5% from 1973 to 1999, 55.8% together, above the 45% average. Doors on those roughly 3,600 homes were very often replaced with white uPVC in the 1980s and 1990s, and white uPVC of that age tends to yellow, chalk or dull.

11.1% of properties, about 710, are post-2000, below the 17% average; on those a builder-fitted composite or GRP door is likely, and composite doors respray from £200.

For comparison, 4.4% of properties in Willerby (1 miles away) and 5.8% in Kirk Ella (1 miles) pre-date 1919, so Anlaby has a similar share of period housing. Since 2000 the figure is 11.1% here, 10.4% in Willerby and 12.0% in Kirk Ella. For the uPVC-era decades from 1945 to 1999 the shares are 55.8% here, 56.5% in Willerby and 57.8% in Kirk Ella.

Who lives in Anlaby, and what that changes

66.5% of the 5,963 households in Anlaby live in detached or semi-detached houses, against 58% across all our towns. Where one of these roughly 4,000 homes has a garage, the front door is often seen next to the garage door, so it is worth choosing both colours together; we can do the garage door in Anlaby on the same visit.

77.5% of Anlaby households own their home, above the 63% average, so if you are one of the roughly 4,600 owner-occupiers planning to stay, it pays to spray the frame at the same time (from £80 to £120) so the whole entrance ages evenly.

Choosing a door colour for Anlaby

66.9% of Anlaby properties were built after 1945, and on later brick and render anthracite grey (RAL 7016) and black are popular because they match modern grey windows; if yours are still white uPVC, uPVC window spraying in Anlaby can be done in the same visit so the colours line up.

Sources: ONS Census 2021, tables TS044 (accommodation type) and TS054 (tenure), via Nomis, aggregated over the LSOAs nearest each town centre; Valuation Office Agency, Council Tax: stock of properties 2025 (CTSOP4.1, build period, 31 March 2025); OS Open Names and ONS Postcode Directory via postcodes.io; OSRM routing on OpenStreetMap data, from LS7 1AH. "Average" is the household-weighted average across the 203 towns and villages on our areas page. Figures compiled 2026-10-19.

Front Door Spraying Prices and Process

Spraying versus a new door

Our service page puts a new composite door at £800 to £2,500 supplied and fitted, and a new uPVC door at £600 to £1,500, against from £200 to respray, though replacement still makes sense when a door is warped, draughty or its locks are failing (our article on front door replacement versus spraying goes through the trade-offs).

How the day runs

  1. Free consultation, colour samples and a fixed written price within 48 hours
  2. Clean, key and fill; remove ironmongery; mask glass, frame and step
  3. Primer matched to the material: Kolorbond-certified on uPVC
  4. Two HVLP topcoats, then ironmongery refitted
  5. Written guarantee issued on completion

For Anlaby, that one day on site means 57 miles and about 1 hour 9 minutes on the road each way from Leeds, which we plan into the booking; see our guarantee terms and how long front door spraying lasts for what happens afterwards.

Booking Front Door Spraying in Anlaby

Getting to Anlaby

Anlaby is 57 miles and about 1 hour 9 minutes by road from Leeds, a longer trip that we plan for: we confirm the date in writing, and your fixed-price quote tells you up front whether the distance affects price or scheduling.

Get a Free Front Door Spraying Quote in Anlaby

Tell us a little about the job. We reply within 2 working hours and send a fixed-price written quote within 48 hours of the consultation.

We use your details only to reply to this enquiry. See our privacy policy.

What Customers Say About Our Front Door Spraying Work

★★★★★
“Matt did a great job of respraying our garage door and the overhang over the front door. Would recommend.”
Helen Whitaker · May 2026 · Google review
★★★★★
“Matt did a great job painting our front door and meter boxes - they look amazing. A thorough, professional job, and the front of our house looks so much smarter now.”
Jemima Stephenson · October 2024 · Google review

These are genuine Google reviews of our front door respray work from customers across Yorkshire, not only Anlaby. Read all our reviews.

Front Door Spraying in Anlaby: Questions

How much does front door spraying cost in Anlaby?

From £200 for a standard uPVC or composite door and from £250 for timber, plus £80 to £120 if you want the frame done too, as a fixed written price after a free consultation.

What guarantee do you give on a sprayed front door?

uPVC doors sprayed with Kolorbond-certified coatings carry a 10-year guarantee. Composite, timber, GRP and steel doors carry our 5-year written guarantee, covering adhesion and colour stability.

Is my Anlaby front door likely to be uPVC, composite or timber?

No public record of door types exists, but in Anlaby 4.4% of properties were built before 1919, 12.5% between 1973 and 1999 and 11.1% since 2000 (Valuation Office Agency), so uPVC is the most likely starting point; we confirm the material at the free consultation.

Can I change the colour of a rented or leasehold front door in Anlaby?

Only with permission. 12.8% of Anlaby households rent privately and 9.4% from a council or housing association (Census 2021), and in those homes the door belongs to the landlord. In a block of flats, 11.0% of homes here, the freeholder or managing agent usually has to agree as well, and a flat entrance door may be a fire door.

How far is Anlaby from ColourHaus?

Our workshop is at Unit 9 Taverners Walk, Sheepscar, Leeds LS7 1AH. Anlaby is about 57 miles by road, roughly 1 hour 9 minutes away, to the east. We confirm visit dates and anything distance-related in your fixed-price quote before you commit.

Do I need permission to change exterior colours in Anlaby?

Usually not for an ordinary house, but listed buildings, conservation areas and Article 4 areas can need consent from East Riding of Yorkshire Council. If your home is in one, check with the council first; we can give you the exact RAL or BS colour reference for the application.